portable water jacket downdraft submersible pump
Around the engine cylinder is a water jacket.
Due to unsatisfactory softened water, dense water scale grows inside the cooling water jacket blast furnace.
Distribution of water flow is an important factor that affects the double water jacket boiler.
This coolant liquid or water is usually stored in a place known as the water jacket.
A water - cooling system consists of water jacket, water pump, radiator, thermostat, cooling fan, rubber hose, etc.
Two methods for roaster gas cooling, water jacket and waste heat boiler, are alternative.
The research and application of structural member inspection technique for offshore deep water jacket
The cooling liquid is water. Antifreeze compounds are added to the water during the winter. The water jacket are cast into the cylinder Blocks and heads.
A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and necessary hoses.
This paper provides some suggestions in the management and reducing the accident of water jacket furnace, through analyzing the reasons for the leak of a coil pipe in water jacket furnace.
This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
The cylinder head water jacket of a high speed diesel engine is analyzed by using CFD technology.
The fan sucks air in through the front of the car to cool the water in the car radiator. This water then flows back through the water jacket around the engine cylinders to cool them off.
The exterior of the tank body is provided with an interlayer water jacket provided with a constant temperature heating device and a water inlet and a water outlet valves.
The effects of water jacket configurations of cylinder head bottom deck on the bridge zone temperature, axial temperature gradient and minor principal stress were investigated.
The utility model relates to heat exchange fins on a heat exchange water jacket in household cooking and heating stove implements, belonging to the technical field of heating.
During the crude oil gathering and transporting, heating crude oil with water jacket furnace usually applies the manual igniting mode or manual temperature adjusting mode.
Because acidified roasting intensity of fluid bed roaster is lower, this paper puts forward a program to modify the water jacket, the cooler, the joint part etc.
The rotary hearth calciner in calcinations device of Jinzhou Petrochemical Incorporation was cracked and burnt out at the joint be - tween water jacket and inner tube during its operation.
