The interfacial viscosity of super critical separated Iranian light vacuum residue fractions was investigated by using shear interfacial viscosity meter.
In this paper SBR modified cement slurry can get best bond effectiveness as interfacial bond materials.
Surfactant: in addition amount of low also can significantly reduce the interfacial tension of the material.
Reduction of interfacial tension can increase capillary number, accordingly, reduce saturation of irreducible oil, enhance ability of oil recovery.
Also, the mechanism of this process has been analyzed with the concept of "interfacial vaporization heat sink".
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
The interfacial tension of the alkali ASP system descended with the alkali and surfactant density increasing, and decreased with time.
The results also confirm that the ion valence in aqueous phase plays a role in interfacial tension measurement when demulisifer exists in the oil phase.
The experimental results show that in the pool nucleate boiling process the "effect of interfacial vaporization heat sink" obviously increases with the heat transfer flux.
The boiling hysteresis mechanism has been analyzed on the base of the interfacial vaporization heat sink effect and the change in activation way of boiling nuclei.
The effect of solid particle content in feeding liquid on phase disengagement and interfacial emulsion in copper solvent extraction is studied.
As interfacial agent, the mix of cement and fly ash can improve the adhesive shear strength. After planted reinforced bar, the shear strength of new and existing concrete increases greatly.
The influence of concentration of KH-570silane coupling agent solution to the pull-off bonding strength of concrete at the new-to-old interfacial layer was studied through experiment.
The results show that the oil droplet size, flow rate of the emulsion along the membrane surface, liquid-liquid interfacial tension and membrane flux can significantly affect oil-removing efficiency.
