1、I just got the boot.
2、Set up the boot server.
3、get the boot on the wrong foot
4、The rat is in the boot.
5、He got the boot for coming late.
6、Firmware doesn't recognize the boot disk.
7、Select the boot disk from DS8000.
8、After the boot countdown, the system automatically invokes the boot script.
9、The first step of the boot process is the boot loader shown in Figure 1.
10、The LILO boot loader expanded the boot capabilities, but lacked any file system awareness.
11、The boot= line tells LILO where to install the boot loader.
12、Another important QEMU launch option is -boot, which specifies the boot device.
13、The boot loop is an annular sling sewn on the upper edge of the heel of the boot and easy to lift when wearing the boot.
14、The second stage boot loader is the real meat of the boot loader; many consider it the only real part of the boot loader.
15、To lessen the risk of getting a bad configuration for the boot loader in RHEL 4 or 5, always create a boot partition (/boot) for your system.
16、The man stared at Jack, then raised the boot.
17、The boot sector is always at the same place-track 0, cylinder 0, head 0 of the boot device.
18、That piece of code is the boot firmware.
19、When the boot menu comes up choose Ubuntu.
20、This type of boot tends to have toe and heel clamps to secure the boot to the board.
21、Remember again to select Ubuntu at the boot screen.
22、Primary boot loaders are where the first stage of the boot loader is installed on the MBR (per the previous description).
23、During the boot of the kernel, the initial-RAM disk (initrd) that was loaded into memory by the stage 2 boot loader is copied into RAM and mounted.
24、Like Knoppix, it shunts boot options off to switches you can type at the boot: prompt in the few seconds before it launches into the default.
25、Configure and ensure the boot list is pointing to the standby BOS as the first boot device, as shown in Listing 17.
26、That way, if I messed up any of the configuration in my file, I could take out the boot disk and boot into Linux as before.
27、To view all the available options, peruse the boot code lists by pressing F2, F3 or F4 at the CD boot prompt.
28、The saber rubbed the boot to replace the pinball device of the landmine.
29、To boot the relevant OS, the bootloader needs to read the relevant kernel from disk
30、The bootstrap then loads the boot Logical Volume (BLV) into memory.
31、install= is one of the files used internally by LILO during the boot process.
32、Set up HBA to enable the BIOS and select the boot device from DS8000.
33、When AIX partition boots, the firmware may not recognize the boot disk.
34、One of the adapters is the boot adapter, not used for HACMP.
35、It holds drivers that EFI can use during the boot process.
36、I noticed that the boot list on each VIOS had changed.
37、HVI cotton measuring instrument in actual use during the boot are often unable to self-test.
38、The rear bracket box is arranged at the lower end inside a boot of the automobile and can be rotated in or rotated out from the boot by the supporting function of the rear bracket box.
39、This pauses the pauses the boot process for five seconds, waiting for slow devices to register with the system bus.
40、If a VIOS fails, the service address moves to the boot adapter served by the redundant VIOS.
41、Fire gloves should coincide with the cuffs and trousers should be placed in a fire the boot, and boot body form part overlap and rescue should be closely linked to the door all the parts wear.
42、The outsole is where the boot meets the trail, available in different compositions of rubber with various tread patterns.
43、As a pre-cautionary measure, we verify that rootvg is now mirrored, include the new disk in the boot list and create a new boot image for the mirrored volume group.
44、The compact option magically makes the boot process quicker by merging adjacent disk read requests into a single request.
