Thermal sprayed metallic coatings-Determination of shear strength
Cellular plastics--Determination of shear strength of rigid materials
The shear strength is equal to the cohesion of substance.
Horizontally pushing lifting jack of direct shear tests are operated on rock mass shear strength test. - center point group analysis is used for treating shear test data.
The safety factor of karst cave roof is defined as the ratio of actual shear strength parameter to critical failure shear strength parameter in this paper.
The stability of slope is studied by a shear strength reduction technique.
Tensile strength and lap shear strength increased with increasing of grafting degree due to great improvement of polarity.
Test method for apparent shear strength of pipeline coatings to metal
An extremely fine filamentary crystal with extraordinary shear strength and unusual electrical or surface properties.
Slope stability analysis by Lagrangian difference method based on shear strength reduction
Experimental research on shear strength of basalt fiber composites reinforced by thermosetting resin
Without shear resistant connection in slabs, the shear strength of the graded tailing paste mortar is more than that of high-density tailing mortar.
Light steel reinforced concrete shear wall is a system structure resisting lateral force, so the shear strength is the main performance parameter.
Different shear displacement histories mainly affect the shear strength of joints, and have a little relationship with the dilatancy property of rock.
As interfacial agent, the mix of cement and fly ash can improve the adhesive shear strength. After planted reinforced bar, the shear strength of new and existing concrete increases greatly.
The performance of the light steel reinforced concrete and the shear strength are deeply studied in this thesis.
Effect of phosphorus content on microstructure and shear strength of Sn-2.5Ag-2.0Ni/ Ni(P) solder joint
Based on the exploration and sampling on the spot and with plenty of direct shear tests, it can be concluded that the roots can enhance the ability of resist shear strength of soil.
In order to approximate the actual vertical stiffness coefficients of the joint elements representing the shear strength of soil, formulas and iteration method are suggested.
The shear strength formula for brick masonry walls reinforced with CFRP is presented, and has a good agreement with the test results.
The major engineering geological problems of US dam site of Laokou Complex include relatively soft base rock lithology, low shear strength and bearing capacity.
When the consolidation ratio is the same, the effect of failure criterion on the dynamic shear strength would reduce with the failure time of vibration increasing.
In the design of articulation hole bolt, the blur variable and random variable existing at the same time, the blur reliability design method of shear strength and extruding strength are approached.
The earth dam foundation at Heilongtan Reservoir in Lunan county, Yunnan province is consisted of silty sand Layer and silty soil with low bearing capacity and poor shear strength.
The study results indicate that there is a soil liner shell outside the mortar liner shell, and the shear strength of the soil liner is obviously higher than the undisturbed soil.
Finally, the shear strength reduction technique is used to analyze the seismic stability of Nuo Zhadu core wall type rockfill Dam and Chang Heba core wall type rockfill Dam in FEM.
