On the basis of theory analysis, it is deduced that the axial stress is linear distribution, when the steel support is loaded by axial force and moment.
Under the approximation of geometric optics, the axial force exerted on the Mie microsphere particles is simulated.
The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.
In this paper, a improved geometric stiffness matrix of a column element considering axial force-lateral displacement effects is derived.
The mechanics of its performance are studied by researching the deformation of excavation, the force of anchor and the distribution of axial force.
The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated.
Based on the analysis of tapping force system and characteristic of chip removal, it is confirmed that radial force, axial force and jam of chip removal are the main reasons for poor thread quality.
The monitoring results must be adjusted according to tidal changes in-order to study the relativity of axial force of piles and load of upside structure.
Fiber model beam-column elements are presently one of the most practical and efficient element models handling biaxial bending and variable axial force coupling problems of frame structures.
The gear train (10) may further include an absorber (16) configured to provide an axial force on at least one of the plurality of helical pinions (14).
A balance plate is put into the pump head to balance the axial force without lowering efficiency and a good effect got.
Motor's speed is low, the balance of impeller is good, the axial force is balanced by water power, so the pump features light tremor, low noise and smooth operation.
And the axial force of soil nail in the slope with isometric soil nailing supporting was slightly greater than that in the slope with non-isometric soil nailing supporting.
Measured Q-S curve are back figured by nonlinear optimization approach and model parameters are found simultaneously, then distribution of axial force and skin friction along pile are calculated.
Thrust ball bearings are designed for supporting axial forces; they are employed where axial forces are too high to be transmitted by radial bearings.
